USER FRIENDLY OPERATING INSTRUCTIONS FOR RICHMAT HJH92E WIRELESS HAND CONTROL SYSTEM

User Friendly Operating Instructions for Richmat HJH92E Wireless Hand Control System

User Friendly Operating Instructions for Richmat HJH92E Wireless Hand Control System

Blog Article

????️ Setting Up Your Richmat HJH92E Remote Control


1. Pairing the Remote with the Control Box


To establish communication between your remote and the control box:





  1. Clear Existing Pairing:





    • Press and hold the Head Up and Foot Down buttons on the remote simultaneously until the backlight flashes.






  2. Enter Pairing Mode on the Control Box:





    • Power on the control box. It will enter pairing mode within 60 seconds.






  3. Pair the Remote:





    • Press and hold the Head Down and Foot Up buttons on the remote until the buzzer rings and the backlight flashes, indicating successful pairing.






Note: If any key is pressed for more than 50 seconds, the remote will enter sleep mode. Press any key to wake it up. Richmat HJH92E User Manual






???? Saving and Recalling Memory Positions


The HJH92E allows you to save and recall up to three custom positions:





  1. Save a Position:





    • Adjust the bed to your desired position.




    • Press and hold the Flashlight button for 5 seconds until the backlight flashes.




    • Within 2 seconds, press one of the memory buttons (M1, SNORE, or ZG).




    • A buzzer sound confirms the position is saved.reddit.com+1evercomfybed.com+1






  2. Recall a Position:





    • Press the corresponding memory button (M1, SNORE, or ZG) to return to the saved position.









???? Resetting the Remote Control


To reset all settings to factory defaults:





  1. Press and hold the Flashlight and LOCK buttons simultaneously for about 11 seconds until the backlight flashes.




  2. All memory positions will be reset, and the remote will enter one-button release mode.device.report+2manuals.plus+2manualspro.net+2manuals.plus+2manualspro.net+2device.report+2







???? Locking and Unlocking the Remote Control


To prevent accidental button presses:





  1. Lock the Remote:





    • Press and hold the LOCK button for 5 seconds until the backlight flashes three times.






  2. Unlock the Remote:





    • Press and hold the LOCK button for 5 seconds until the backlight flashes three times.






Note: When locked, all buttons except the Flashlight will be disabled.






⚠️ Important Safety Precautions




  • Avoid Frequent Switching: To protect the reliability and safety of the motor and control box, do not switch the buttons frequently.




  • Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:





    1. This device may not cause harmful interference.




    2. This device must accept any interference received, including interference that may cause undesired operation.






  • Modifications: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.device.report+1manuals.plus+1manuals.plus






For a comprehensive understanding, you can view the manual online at ManualsPro. This resource provides detailed diagrams and additional information to help you make the most of your Richmat HJH92E remote control.

Report this page